Flux-cored wire WT-H590 (TM.WELTEC). TUU 28.7-31749248-002-2002

WT-H590

TUU 28.7-31749248.002-2002

EN 14700/ T Fe8

DIN 8555/ MF 6-GF-60-GPR (suspended)

Welding process: G – in shielding gas S – under the flux	Wire diameter, mm	Recommended shielding gases and fluxes
G	1,2-2,4	С1 (100% СО₂), М21 (18% СО₂ + 82% Ar)
S	1,6-3,6	АН-20, АН-26

General characteristics

It is designed for automatic and semi-automatic gas-shielded arc or submerged arc restoration and hard-facing of parts made of carbon and low-alloyed steels operating under conditions of metal-to-metal friction at elevated temperatures, thermal cycling and high specific pressures.

Application

Typical applications are as follows: hard-facing of blades for cold and hot metal cutting, feeding rollers, cutting edges of tools, punches, dies, trimming and cleaning punches, plate straightening rollers, rollers for solid mineral grinding mills and stone crushers, scrapers, feeding screws, excavating machinery, choppers and shovel blades and others.

Weldability

The Formation of the weld bead	good
Separation of Slag	good
Deposition Rate, kg/h	3-10
Addiction Weld metal Cracking	moderate
Consumption per 1 kg of wire Weld metal, kg	1.05-1.15
Weld metal Hardness (HRC for 3rd-4th layer, unless otherwise stated)	after surfacing 55-61

Technological features

It is recommended for metal arc deposition at direct current of reverse polarity - DC (+).

Properties of the weld metal

Deposit composition (Weld metal), %

C	Mn	Si	Cr	S	P
0.5	0.5	2.6	8.5	0.014	0.016

Welding Alloys Analog

Brand of the wire	Distance, %	virobnik	C	Mn	Si	Cr	Al	Ni	Cu	Mo	S	P	Nb	V	N	Ti
HARDFACE L (9)	1.01	Welding Alloys	0.5	1.5	2.5	8.5
ROBODUR K CERAMIC-G (14)	1.04	Welding Alloys	0.35	0.7	2.5	9.5
ROBOFIL B P91 (75)	2.98	Welding Alloys	0.12	0.7	0.3	10	0.002	0.3	0.05	1	0.005	0.007	0.06	0.23	0.05
ROBODUR K 600-G (12)	3.29	Welding Alloys	0.5	1.2	0.7	6				0.7
ROBOTOOL 58-G (21)	3.48	Welding Alloys	0.35	1.2	0.5	7				2.2						0.3

Recommended Surfacing Modes

Wire diameter, mm

Welding process:

Current, A

Voltage, V

Surfacing rate, m/h

Gas consumption l/min

1,2	G	100 - 300	22 - 30	8 - 13	7 - 14
1,6	G	120 - 320	23 - 32	10 - 15	8 – 15
1,6	S	140 - 220	25 - 29	10 - 15
2,0	G	150 - 400	24 - 34	12 - 18	8 - 16
2,0	S	160 - 260	26 - 30	12 - 18
2,4	G	180 - 450	25 - 36	15 - 20	10 - 18
2,4	S	200 - 300	26 - 31	15 - 20
2,8	S	240 - 360	28 - 32	18 - 23
3,0	S	260 - 380	29 - 33	18 - 23
3,6	S	320 - 450	30 - 34	20 - 25

Delivery type (More)

Wire diameter, mm	Cardboard barrel			Molded skeins of frameless type		Frame drum (B)	Coil (S), (BS)
	Cardboard barrel			Hank in the corrugation box	Metallic barrel	Frame drum (B)	Coil (S), (BS)
	To 100 kg	To 150 kg	To 300 kg	To 30 kg	To 70 kg	To 25 kg	To 15 kg
1.2	X	X	X	X	X	X	X
1.6	X	X	X	X	X	X	X
2.0	X	X	X	X	X	X	X
2.4	X	X	X	X	X	X	X
2.8	X	X	X	X	X	X
3.0	X	X	X	X	X	X
3.2	X	X	X	X	X	X
3.6	X	X	X	X	X	X

* По требованию заказчика возможно изготовление проволоки Ø 4,0 – 6,0 мм.

There are no articles in this language