WT-H650

TUU 28.7-31749248-006-2003 EN 14700/ T Fe13 DIN 8555/ MF 10-GF-65-GR (suspended)

Welding process: О – open arc	Wire diameter, mm	Recommended shielding gases and fluxes
О	1,6-3,2	-

General characteristics

It is designed for automatic as well as semi-automatic open-arc or gas-shielded arc or submerged arc restoration and hard-facing of parts made of carbon and low-alloyed steels operating under conditions of metal-to-metal friction at room and elevated temperatures.

Application

Typical applications are as follows: mechanized hard-facing of thrust bearing for carriages of railroad cars, rollers of running gear for tracked vehicles, gearwheels, rollers for roller conveyors, crane wheels, bandages for tram wheels, brake pulleys and shaft seating places etc.
The wire has found wide application at railroad car repairing Mo- 0.6 yards and machine engineering plants.

Weldability

The Formation of the weld bead	good
Separation of Slag	good, solid crust no
Deposition Rate, kg/h	4-12
Addiction Weld metal Cracking	increased
Consumption per 1 kg of wire Weld metal, kg	1.1-1.2
Weld metal Hardness (HRC for 3rd-4th layer, unless otherwise stated)	after surfacing 60-64

Technological features

It is recommended for metal arc deposition at direct current of reverse polarity - DC ( +).

Properties of the weld metal

Deposit composition (Weld metal), %

C	Mn	Si	Cr	V	Ti	Ni	Mo	B	S	P
1.5	0.6	0.6	14.0	0.7	0.4	1.2	0.6	1.8	0.017	0.016

_

Recommended Surfacing Modes

Wire diameter, mm	Welding process:	Current, A	Voltage, V	Surfacing rate, m/h	Gas consumption l/min
1,2	G	100 - 260	22 - 29	8 - 13	6 - 14
1,6	O	140 - 240	24 - 28	10 - 15
	G	120 - 320	23 - 32	10 - 15	7 - 15
	S	140 - 220	25 - 29	10 - 15
2,0	O	160 - 260	25 - 28	12 - 18
	G	150 - 400	24 - 34	12 - 18	8 - 16
	S	160 - 260	25 - 30	12 - 18
2,4	O	200 - 320	26 - 29	15 - 20
	G	180 - 450	25 - 36	15 - 20	10 - 18
	S	200 - 300	26 - 31	15 - 20
2,8	O	240 - 360	26 - 30	18 - 23
	S	240 - 360	28 - 32	18 - 23
3,0	O	260 - 400	26 - 30	18 - 23
	S	260 - 380	29 - 33	18 - 23
3,6	S	320 - 450	30 - 34	20 - 25

Delivery type (More)

Wire diameter, mm	Cardboard barrel			Molded skeins of frameless type		Frame drum (B)	Coil (S), (BS)
				Hank in the corrugation box	Metallic barrel
	To 100 kg	To 150 kg	To 300 kg	To 30 kg	To 70 kg	To 25 kg	To 15 kg
1.6	X	X	X	X	X	X	X
2.0	X	X	X	X	X	X	X
2.4	X	X	X	X	X	X	X
2.8	X	X	X	X	X	X
3.0	X	X	X	X	X	X
3.2	X	X	X	X	X	X

---

Articles and website pages that mention this wire