TMW5mc

TUU 28.7-31749248.002-2002 (suspended) EN ISO 17632-A: T 42 4 M M21 3 H 5 AWS A5.20: E70Tl 5-M21 A4-G-H4

Welding process: G – in shielding gas	Wire diameter, mm	Recommended shielding gases and fluxes
G	1,0–2,0	М21 (18% СО2 + 82% Ar)

General characteristics

It is designed for high-speed single- or multi-pass automatic robotized arc welding of metal structures of carbon and low-alloyed steels as well as ship-building steels in flat position using shielding atmosphere of argon-based gas mixtures. No intermediate removing of slag is needed at welding of filling passes at multi-layer welding due to small amount of the formed slag. As compared to arc welding with solid wire, this wire improves weld formation, ensures slight spattering and lower welding fume generation in welding zone. It is used for welding of different purpose metal structures. For example, welding of thin metal parts, car body parts, building metal structures, as well as in transport and load-lifting machine engineering branches of industry.

Application

The wire is used for arc welding of high-duty metal structures with heightened plasticity requirements at low temperatures being set to.

Weld Positions

Ø 1,2-1,6 мм: Ø 2,0 мм:
 

Welding technology

The welding is performed at reverse polarity of welding current- DC(+).

Welding and technological properties

Stability of arc burning	high
Sectional shape and appearance of the seam	good
Resistance to cracking and pore formation	high
Metal spraying	low
Deposition rate, kg/h	1,5–10,0
Wire consumption per 1 kg of deposited metal, kg	1,05–1,15

Deposit composition (Weld metal), %

C	Si	Mn	S	P
≤0.1	0.45	1.5	≤0.02	≤0.02

_

Typical mechanical properties of the weld metal

Ultimate tensile strength, MPa	Yield Strength, MPa	Elongation (l = 5×d), %	Impact strength, KCV, J/cm2 at T °C
minimum			+20°	-20°	-40°
520	420	22	≥160	≥100	≥60

Modes of the welding process

Wire diameter, mm	Welding process:	Current, A	Voltage, V	Surfacing rate, m/h	Wire overhang, mm mm	Gas consumption l/min
1,2	G	150-300	20-30	8 - 13	15 - 20	7 - 14
1,6	G	180-350	22-31	10 - 15	15 - 25	8 - 16
2,0	G	200 - 400	24-32	12 - 18	15 - 25	9 - 18

Delivery type (More)

Wire diameter, mm	Cardboard barrel			Molded skeins of frameless type		Frame drum (B)	Coil (S), (BS)
				Hank in the corrugation box	Metallic barrel
	To 100 kg	To 150 kg	To 300 kg	To 30 kg	To 70 kg	To 25 kg	To 15 kg
1.2	X	X	X	X	X	X	X
1.6	X	X	X	X	X	X	X
2.0	X	X	X	X	X	X	X

---

Articles and website pages that mention this wire